MONEL ALLOY 400 UNS N04400 Forged Round Bar in Stock A-one Alloy Manufacturer

Introduction

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

Density:8.8g/cm³

Chemical composition

Character

• Resistant to seawater and steam at high temperatures
• Excellent resistance to rapidly flowing brackish water or seawater
• Excellent resistance to stress corrosion cracking in most freshwaters
• Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
• Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
• Excellent resistance to neutral and alkaline salt
• Resistance to chloride induced stress corrosion cracking
• Good mechanical properties from sub-zero temperatures up to 1020° F
• High resistance to alkalis

Application

• Marine engineering
• Chemical and hydrocarbon processing equipment
• Gasoline and freshwater tanks
• Crude petroleum stills
• De-aerating heaters
• Boiler feed water heaters and other heat exchangers
• Valves, pumps, shafts, fittings, and fasteners
• Industrial heat exchangers
• Chlorinated solvents
• Crude oil distillation towers

Equal grade

UNS N04400, Alloy 400, Monel 400

Chemical composition (%)

C≤0.30, Mn≤2.00, S≤0.024, Si≤0.50, Cu=28.0~34.0, Fe≤2.50, Ni=Remainder

Standards

ASTM B163

ASTM B725

ASTM B165

ASTM B127

ASTM B164

ASTM B564

ASTM B366

Forms of Monel 400 available at XUNSHI

Plate, strip, bar, wire, pipe, forging, flange, fastener

Delivery

Plenty of bars/billet/sheet/plate in stock. For other products please contact XUNSHI for confirmation

About XUNSHI

Suzhou Xunshi New Material Co. Ltd- referred as XUNSHI hereafter, is a professional manufacturer of high-performance alloy products. XUNSHI is engaged in supplying high quality and cost-effective Superalloy, Anti-Corrosion Alloy, Precision Alloy, Special Stainless Steel and Magnetostrictive Material to customers worldwide.

Why XUNSHI

· Highly experienced in alloy industry

· Top experts of industry in China

· Advanced technology and process from top famous institutes in China

· Advanced devices through whole production and inspection process

· Strict quality control system

· Company motto: best service, most value

· Smart sales policy

Service Items of XUNSHI

· Non-standard product research and pre-production

· Fabrication of products

· Cutting, splitting for sheets and plates in stock

· Heat treatment (Solution treatment, aging harden treatment, anneal, spring temper, quench etc.)

· Surface finish (peeling, gridding, polishing)

· Logistics service

· Customized packing service (also for exporting)

· Import and export (XUNSHI is certificated)

· Document translation

· Hard-to-find material sourcing

Customers of XUNSHI

Customers of XUNSHI are all over China (Taiwan and Hong Kong included). And we are exporting to USA, Canada, Italy, UK, Poland, Greece, Russia, Turkey, Iran, Israel, South Africa, South Korea, North Korea, India, Argentina, and Brazil and so on. Customers from 30+ countries trust us.

Where is XUNSHI

A- XUNSHI is in Huaqiao, Kunshan, 215332 China, which is very closed to Shanghai.

B- Xunshi is around 80KM from Shanghai Pudong International Airport (PVG).

C- 20KM from Shanghai Hongqiao Airport

D- 20KM from Shanghai Hongqiao Railway Station

E- You can contact XUNSHI sales for a pickup service.

Suzhou Xunshi New Material Co., Ltd (refered as Xunshi afterwards) is a professional supplier of high performance alloys. Our factory is specialized in manufacturing Nickel alloys & Cobalt alloys for 10⁺ years，with a company mission to provide a high quality, reliable source for precision alloys, high temperature alloys and stainless steels in both pilot run and mass production. We are professionally manufacturing materials with unique features, which are then used in aerospace, military, electronics, marine, petroleum and petrochemical industries.

Base on “Quality-oriented, Leading Technology, Continuous Improvement, Customer Satisfaction”, we believe Xunshi could be your best supplier.

Product Scope of Xunshi

· Inconel

· Hastelloy

· Incoloy

· Monel

· Nimonic

· Nitronic

· Haynes

· Special Stainless Steel

· Soft Magnetic Alloy

· Permanent Magnetic Alloy

· Elastic Alloy

· Controlled Expansion Alloy

· Magnetostrictive Material

Services of Xunshi

· Material selection

· Non-standard product research and pre-production

· Hard to find material sourcing

· Cutting/splitting

· Precision machining

· Heat treatment

· Customized Packing

· Logistics service

Advantages of Xunshi

· Experienced in industry

· Quality control system

· Authorized Certificates

· Guaranteed delivery and quality

· Customers from 30+ countries trust us

Xunshi is engaged in introducing China-origin high performance alloys to the entire world. Choose Xunshi, choose high performance.